Appearance Advantages
- High flatness: the surface is flat and smooth, without obvious defects such as unevenness, wavy deformation, indentation or bulging. Whether observed with the naked eye or touched by hand, you can feel the evenness and flatness of the surface. In the subsequent processing, such as bending, stamping, etc., the colour coated aluminium coil with high flatness will not be ruptured or deformed due to uneven stress.
- Uniformity of colour: The colour is uniform and consistent, with no obvious colour difference. Whether it is different parts of the same roll of colour coated aluminium coil, or between different batches of production of colour coated aluminium coil, the colour should maintain a high degree of consistency. A quality colour coating process ensures that the pigments adhere evenly to the surface of the aluminium coil, resulting in vibrant, bright and long-lasting colours.
- Strong coating adhesion: good adhesion between the coating and the aluminium coil substrate makes it difficult for the coating to flake, peel or lose paint. The adhesion of the coating can be examined by simple scratching test or tape sticking test, i.e., use a razor blade to scratch on the surface of the coating, then stick and tear off the tape and observe whether the coating is brought up by the tape or not.
Performance Advantages
- Good weather resistance: it can withstand long-term sunshine, rain, wind and other natural environments, and is not easy to fade, discolouration, chalking and other phenomena. In outdoor use, weathering good colour coated aluminium coil can maintain the beauty and performance for a longer period of time. For example, colour coated aluminium coils coated with high-quality polyester paint or fluorocarbon paint have good weather resistance, and the warranty period can reach 10 years and 20 years respectively.
- Strong corrosion resistance: it can resist the erosion of acids, alkalis, salts and other chemicals, and is not easy to corrode in harsh environments. This is especially important for colour coated aluminium coils used in corrosive environments such as seashores and chemical parks. High-quality colour coated aluminium coils undergo special surface treatments during production, such as passivation and phosphating, to improve their corrosion resistance.
- Excellent mechanical properties: it has good bending and bending strength and toughness, and is able to withstand certain external impacts and deformations without rupture or damage. For example, in the building curtain wall, roof and other application scenarios, the colour coated aluminium coil needs to have enough mechanical strength to resist wind pressure, snow pressure and other loads.
- Good fire performance: it has a certain fire performance, which can play a certain flame retardant role in the event of fire and reduce the spread of fire and hazards. The colour coated aluminium coil that meets the relevant national standards, its fire rating should meet certain requirements.
Environmental protection
- Recyclability: aluminium is a recyclable metal material, good quality colour coated aluminium coil can be conveniently recycled and reused at the end of its service life, reducing waste of resources and environmental pollution.
1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%) |
Purity | 1050 1050A 1060 1070 1100 |
Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C) |
Application | Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc. |
Feature | Lid Shigh conductivity, good corrosion resistant performance, high latent heatof melting, high-reflectance, well welding property, low strength, and notsuitable for heat treatments. |
2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) |
Alloy | 3003 3004 3005 3102 3105 |
Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C) |
Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistantperformance, well welding property, good plasticity, low strength but suitablefor cold working hardening |
3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) |
Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34H16/H26/H36 H18/H28/H38 H114/H194, etc. |
Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, AutomobileBody Sheets, Automobile Inside Board, The Protective Cover On Engine. |
Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength,good corrosion resistant performance, well welding property, well fatigue strength,and suitable for anodic oxidation. |
4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) |
Alloy | 6061 6063 6082 |
Temper | O F, etc. |
Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
Application | Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components,Transport Ship, Semiconductor Equipments, etc |
Feature | Good corrosion resistant performance, well welding property, good oxidability,easy to spray-finishing, well oxidation coloring, good machinability. |
Element content
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al |
Single | Total |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.6 |
1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.15 | ≥99 |
1200 | Si+Fe:1.00 | 0.05 | 0.05 |
| _ | 0.1 | 0.05 | 0.05 | 0.15 | ≥99 |
3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | 0.1 | _ | 0.05 | 0.15 | Remainder |
3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Remainder |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | 0.25 | _ | 0.05 | 0.15 | Remainder |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | _ | 0.05 | 0.15 | Remainder |
5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
6061 | 0.4~0.8 | 0.7 | 0.15~0.40 | 0.15 | 0.80~1.20 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Remainder |
6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.90 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Remainder |
6082 | 0.7~1.3 | 0.5 | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | 0.1 | 0.05 | 0.15 | Remainder |
8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | Remainder |
Features and Applications
Type | Features | Applications |
1050/1060/1070/ 1100 | high electro conductibility, and heat conductibility,good formability,bending and extending | Chemical and food storage, electric conductor, soft pipe for brewing industry, heat exchanger, decoration etc |
|
2024 | hard aluminum alloy with Intrinsic formability and corrosion resistance | most popular alloy used for airoplane and michanery industry, used for aircraft structures, fasteners, hardware, wheels, screw machine products etc |
|
3A21/3003 | Anti-rust alloy, cannot be heat treated, not very high strength but good formability, anti-rust quality and welding quality | Food and chemical handling, tanks, roofing and ceiling sheet etc |
|
3105 | Anti-rust alloy, higher strength than 3003 ,cannot be heat treated, not very high strength but good formability, anti-rust quality and welding quality | PP cap,construction, food and chemical handling, water pipe, roofing etc |
|
3004 | Anti-rust alloy, cannot be heat treated,better strength than 3003 and good formability, anti-rust quality and welding quality | Same application as 3003 but with higher demand on strength, such as lighting industry, air-colling industry, bevrage cans,cable wire etc |
|
5052/5A02 | Anti-rust alloy, cannot be heat treated, not very high strength but good formability, anti-rust quality and welding quality | Pipe and fuel tanks for aroplane fule and oil,parts for all kinds of sea and road equipment, cold stamping parts,cover for electric appliance |
|
|
5754 | better strength than 5052, good anti-rust quality,formability and welding quality | Most popularly used in viechile parts industry and tank production industry, also used for protective screen on highway |
|
|
5083 | With Mg as its main minor ingredient, 5083 has good anti-rust quality,formability, good cold workability, welding quality and better strength than 5754 | Alloy with best prosperous future, used in boat, naval craft,viechle,high pressure storgae devices, refrigerating device, TV tower,armour device etc |
|
|
5182 | Similar mechanical property as 5A02 but better welding quality than 5A02 | Especially for welding use and also all use of 5083 boat, naval craft,viechle,high pressure storgae devices, refrigerating device, TV tower,armour device etc |
|
|
5456 | Similar mechanical property as 5083 but better strength | Popular alloy in US to replace 5083,Used in boat, naval craft,viechle,high pressure storgae devices, refrigerating device, TV tower,armour device, oil drilling platform etc |
|
|
6061/6063 | processed with heat treatment pre stretching, strength not good as 2024 and 7075 but 6061 has very good formability,welding quality and anti-rust quality, 6061 does not become deformed after shaping and it has good quality for polishing, anodizing and color fim. | Airplane, rocket forged ring;trasportation device such as subway train, viechile,parts for eignee;packing such as can use thin coil of 6061,; PS plate for printing; construction and decoration using good welding and surface treatment quality of 6061; home appliance parts such as electric devices etc |
|
|
|
|
6082 | Medium strength and good welding quality and anti-rust quality | For transportation and construction project like high-speed boat, heavy-lift, roofing structure etc |
7075-T6 | Best high strength of all alloy, good anodizing quality and anti-rust quality | Used for highly stressed structural parts like airplane, machinery, moulding etc |
Galvalume coils
Aluminum tube
Aluminum foil coils
Color coated Aluminum sheets
Aluminum sheets
